This is a set of 3 pcs Steering links with Rod Ends / Brass Hollow Balls for Redcat GEN8.
It not only replaces the weakest link in the stock set up but also improve the existing Bump Steer condition significantly. However, if you want to "totally eliminate" the bump steer, we would suggest our "Servo Relocation Mount" to correct the stock steering geometry.
140 mm Stainless Steel Link x 1 ( Tie Rod )
70 mm Stainless Steel Link x 1 ( Bended Track Bar, Panhard )
65 mm Stainless Steel Link x 1 ( Drag Link )
80 mm Stainless Steel Link x 1 ( Drag Link ) for use with stock servo mount.
Straight Rod End x 4 ( Tie Rod / Track Bar )
10° Angled Rod Ends x 2 ( Drag Link )
Due to the Beeffy M4 rod end on the Tie Rod in this kit, extended 12mm wheel hex is suggested to have better clearance with the tire.
" Husky Link" is our Heavy Duty 6mm SUS304 Stainless Steel M4 Links, paired with our beefy M4 Rod Ends, and Nickel Plated Brass Hollow Balls
Videos Hide Videos Show Videos
19 Reviews Hide Reviews Show Reviews
I have purchased almost every product offered for the redcat gen 8 that you offer from various different sources. I currently have a gen 8 axe and have installed many of your parts along with treal. And first off DIRECTIONS would've been nice. Also the quality of metal is great. But hardware is very lacking in quality. Also I am extremely pissed that most of these items are not direct fitment such as the servo mount. I am 32 years old and have done small appliance repair my whole life. So I have an idea of what is correct and what's not. And honestly I am not happy with the parts I've purchased other than maybe the skids and servo protector. I have the following all from club 5. 1.Husky link kit 2. Steering kit. 3. Rock lighting kit. 4. Servo relocation plate. 5. Servo protection plate. 6. Rock sliders. Also the Rock light kit should have more than just 1 template for all 8 cuts that have to be made for mounting. I really hope se improvements are made so other people won't have these same issues. And thank you for putting the directions on the website recently. It does help alot but they should come with the product. I hope this helps. I love the IDEA of all the products you offer. But please maybe charge more so you can improve the quality some.
These links paired with club 5 servo relocation and 8mm hex’s might just be the best thing to happen to a redcat Gen 8! Stops body roll and replaces the weak steering link setup!
Nice with a bit of work.
Simple install and with the steering servo relocation bracket, no more bump steer.
Hello, Club5 racing team I like the idea behind the steering kit. I am disappointed to find I am replacing plastic link ends with more plastic link ends the metal bars rarely fail in my experience. The other thing is if you tighten the link end all the way onto the link bars so they look and fit properly It leaves the gen8 very pigeon towed making it look funny with the tires towed way in and making it drive trouble, it will not go in a strait line. The included screw is just a hair short for the wheel end of the servo drag link mine does not engage the nylon locking part on the nylock nut. Thank you.
The quality is second to none . Very happy . Thankyou
Outstanding product, little bit of slip in the end links. It would be nice to have the option to have metal end links. Obviously at a higher price, but the option would be nice.
Very heavy duty. Nice look too!
I bought this kit along with the servo relocation mount and was really disappointed with the ball ends. The links themselves were awesome but there is so much slop at the ends I decided to take them off and shelve them. Lesson learned...lol